The parameters required for the order.

The following information must be provided during the order:
The power output (KW)
The speed of the engine (min)-1)
Installation layout (i.e. IM underset install, frank install, or underset/frank install)
The IEC motor plate size = the axis center height above the bottom plate (in mm as a unit)
Voltage (V) and frequency (Hz)
Start method: D.O.L or */△
Use of Frequency Variants
The environmental temperature.
Protection level IP (standard IP55)
There is or is no brake.
Refrigeration method: TEFC (IC411) or TENV (IC410) (with or without refrigeration ventilator)
For hazardous areas: regional and gas classification
Please specify the company name (i.e. ABS, BV, CCS, CCRS, DNV, GL, KR, LROS, NKK, RINA or RMRS)
Due to the necessary service of the motor on the ship, one of the above shipping agencies is required to test and verify in the Rotor's testing workshop, in this case we need to know the name of the ship factory, the ship number, as well as the drive machine.
*Note: For the engine installed by the Franchise as well as for the underset/Franchise, indicate the interfacing diameter of the Franchises and the curtain diameter.